This necklace holder (approx. 13″ wide x 10″ tall) is made from furniture quality air dried lumber that was sustainably harvested, salvaged, or recycled. The holder can be hung on a wall with the wall hangars provided. It will accomodate at least 16 necklaces up to about 20″ in length.
The flat back panel is resawn from solid lumber that I cut to a thickness of about 1/4″ then hand plane or sand to a silky smooth surface. (Some necklace holders use “live edge” lumber where fragments of bark remain on the natural edge). The top-notched hangar is sawn from solid lumber then hand-shaped with bandsaw and spokeshave and smoothed with handplane or sanding block. Notches area individually cut on the bandsaw. Top hangar is rabbeted with router, chisel, and handplane then the panel is fitted and glued into the rabbet.
The entire assembly is finished with hand-rubbed polyurethane for durable beauty and lasting protection. Small brass plated hangars complete the assembly and allow it to be wall hung (hanging screws provided).
Treated with respect and care deserved by fine furniture, this piece should provide many years of service.